Home › Engine / Hybrid System › 3ZR-FE INTAKE / EXHAUST › INTAKE MANIFOLD
RM3090E _51 Engine / Hybrid System _008408 3ZR-FE INTAKE / EXHAUST _0046965 INTAKE MANIFOLD A

3ZR-FE INTAKE / EXHAUST  INTAKE MANIFOLD  REMOVAL  


PROCEDURE

Hide 22210 1.REMOVE THROTTLE BODY ASSEMBLY

Hide 17650G 2.REMOVE VACUUM SWITCHING VALVE (for ACIS)

a.
A250597

Remove the engine cover joint and disconnect the wire harness clamp bracket.


b.

Detach the wire harness clamp.


c.

Disconnect the vacuum switching valve connector.


d.

Disconnect the vacuum hose and No. 2 air hose.


e.

Remove the bolt and vacuum switching valve.


Hide 17111 3.REMOVE INTAKE MANIFOLD

a.
A293800

Detach the 4 wire harness clamps.


b.
A235775

Disconnect the No. 1 fuel vapor feed hose and No. 3 air hose from the intake manifold.


c.

Slide the 2 clamps and disconnect the PCV hose and No. 1 vacuum transmitting hose from the intake manifold.


d.
A205676

Remove the 5 bolts, 2 nuts, intake manifold and intake manifold stay.


e.
A235762

Remove the gasket from the intake manifold.


f.
A293801

Remove the bolt and wire harness clamp bracket from the intake manifold.


g.

with Stud Bolt:

Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.


Hide 12635 4.REMOVE ENGINE COVER JOINT

a.
A216085

Remove the engine cover joint.