Home › Engine / Hybrid System › 3ZR-FE LUBRICATION › OIL PUMP
RM3090E _51 Engine / Hybrid System _008410 3ZR-FE LUBRICATION _0046977 OIL PUMP A

3ZR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15012 1.INSTALL OIL PUMP COVER SUB-ASSEMBLY

a.
A153830
1.25,0.875 0.833,1.458 0.833,1.458 1.323,1 true 0.75,1.479 0.917,1.646 0.167,0.167 10 *1
*1 Alignment Mark


Coat the oil pump drive rotor and oil pump driven rotor with engine oil, and place them into the oil pump body with the marks facing the oil pump cover side.


b.

Install the oil pump cover sub-assembly with the 5 bolts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)


Hide 15131 2.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil.


b.

Insert the oil pump relief valve and oil pump relief valve spring into the oil pump body hole.


c.

Using a 27 mm socket wrench, install the oil pump relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)