Home › Engine / Hybrid System › 3ZR-FE LUBRICATION › OIL PRESSURE SWITCH
RM3090E _51 Engine / Hybrid System _008410 3ZR-FE LUBRICATION _0046980 OIL PRESSURE SWITCH A

3ZR-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not let adhesive adhere to the oil hole.



b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the engine oil pressure switch connector.