Home › Engine / Hybrid System › 3ZR-FE STARTING › RELAY
RM3090E _51 Engine / Hybrid System _008411 3ZR-FE STARTING _0046985 RELAY G

3ZR-FE STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY (ST)

a.
A188757N06
2.708,0.573 2.833,0.208 2.833,0.208 3.052,0.208 false 2.135,0.563 2,0.208 2,0.208 1.771,0.208 false 2.646,1.115 3.063,1.115 false 2.646,1.604 3.063,1.604 false 1.646,0.125 1.802,0.323 0.156,0.198 10 1 3.115,0.135 3.271,0.333 0.156,0.198 10 2 3.125,1.031 3.281,1.229 0.156,0.198 10 5 3.115,1.51 3.271,1.708 0.156,0.198 10 3 0.313,1.25 0.469,1.448 0.156,0.198 10 1 0.313,0.771 0.469,0.969 0.156,0.198 10 3 1.323,0.771 1.479,0.969 0.156,0.198 10 5 1.323,1.271 1.479,1.469 0.156,0.198 10 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.