Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM3090E _51 Engine / Hybrid System _008380 3ZR-FE ENGINE CONTROL _0046989 CAMSHAFT OIL CONTROL VALVE G

3ZR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 11101J 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Inspect the camshaft timing oil control valve assembly (for intake camshaft).

i.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).

Powertrain > Engine and ECT > Active Test
Tester Display
Control the VVT System (Bank1)
50004 234 112

ii.

Check the engine speed when the camshaft timing oil control valve assembly is operated using the GTS with the engine coolant temperature 50°C (122°F) or less.

HINT:
·

When performing the Active Test, the air conditioning should be on.

·

The engine coolant temperature when the engine is started should be 30°C (86°F) or less.

OK:
Condition Specified Condition
Oil control valve OFF Normal engine speed
Oil control valve ON Rough idle or engine stalled
(soon after camshaft timing oil control valve assembly switched from OFF to ON)






e.

Inspect the camshaft timing oil control valve assembly (for exhaust camshaft).

i.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).

Powertrain > Engine and ECT > Active Test
Tester Display
Control the VVT Exhaust Linear (Bank1)
50004 234 87

ii.

Check the engine speed when the camshaft timing oil control valve assembly is operated using the GTS with the engine coolant temperature 50°C (122°F) or less.

HINT:
·

When performing the Active Test, the air conditioning should be on.

·

The engine coolant temperature when the engine is started should be 30°C (86°F) or less.

OK:
Condition Specified Condition
-128% (Oil control valve OFF) Normal engine speed
127% (Oil control valve ON) Rough idle or engine stalled
(soon after camshaft timing oil control valve assembly switched from OFF to ON)