Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › THROTTLE BODY
RM3090E _51 Engine / Hybrid System _008380 3ZR-FE ENGINE CONTROL _0046990 THROTTLE BODY G

3ZR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22210 1.INSPECT THROTTLE BODY ASSEMBLY

a.
A208125
1.969,1.708 2.052,1.708 2.052,1.708 2.208,1.323 false 2.729,1.708 2.646,1.708 2.646,1.708 2.469,1.313 false 1.635,1.625 1.896,1.802 0.26,0.177 10 M+ 2.76,1.625 3.031,1.792 0.271,0.167 10 M- 0.073,0.063 0.25,0.26 0.177,0.198 10 *a
*a Component without harness connected
(Throttle Body Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body assembly.