Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM3090E _51 Engine / Hybrid System _008380 3ZR-FE ENGINE CONTROL _0046994 CAMSHAFT POSITION SENSOR A

3ZR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11101W 1.INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A158220

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

When reusing the camshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or does not jump out of position during installation.




c.

Connect the camshaft position sensor connector.


Hide 11101W 2.INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A158220

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

When reusing the camshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or does not jump out of position during installation.




c.

Connect the camshaft position sensor connector.


Hide 11212 3.INSTALL NO. 2 CYLINDER HEAD COVER