Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008380 3ZR-FE ENGINE CONTROL _0046997 ENGINE COOLANT TEMPERATURE SENSOR A

3ZR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


PROCEDURE

Hide 89422 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.
A251989N01
1.458,1.146 1.229,0.177 1.229,0.177 1.49,0.177 true 1.542,0.104 2,0.302 0.458,0.198 10 SST

Install a new gasket to the engine coolant temperature sensor.


b.

Using SST, install the engine coolant temperature sensor.

SST
09817-33190  

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)

HINT:

Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION



c.

Connect the engine coolant temperature sensor connector.


Hide 2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Hide 17705 3.INSTALL AIR CLEANER CAP SUB-ASSEMBLY

Hide 11212 4.INSTALL NO. 2 CYLINDER HEAD COVER

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER