Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM3090E _51 Engine / Hybrid System _008380 3ZR-FE ENGINE CONTROL _0046999 AIR FUEL RATIO SENSOR G

3ZR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A119369
2.5,0.667 2.313,0.667 2.313,0.667 1.906,1.125 true 1,0.781 1.26,0.781 1.26,0.781 1.583,1.115 true 1.094,1.771 1.292,1.771 1.292,1.771 1.573,1.583 true 0.74,0.698 1.052,0.917 0.313,0.219 10 +B 2.552,0.583 3.073,0.875 0.521,0.292 10 HA1A 0.729,1.698 1.219,1.896 0.49,0.198 10 A1A- 0.052,0.042 0.448,0.281 0.396,0.24 10 *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.