Home › Engine / Hybrid System › 1AD-FTV FUEL › FUEL SEDIMENTER WARNING SWITCH › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008413 1AD-FTV FUEL _0047011 FUEL SEDIMENTER WARNING SWITCH G

1AD-FTV FUEL  FUEL SEDIMENTER WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84461B 1.INSPECT LEVEL WARNING SWITCH

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Float upper end position Below 1 Ω
1 - 2 Float lower end position 10 kΩ or higher


If the result is not as specified, replace the level warning switch.