Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
RM3090E _52 Drivetrain _008436 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0047080 AUTOMATIC TRANSAXLE SYSTEM U

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  FAIL-SAFE CHART  


Fail-safe


This function minimizes the loss of operation when any abnormality occurs in a sensor or solenoid.

Fail-safe Control List
Malfunction Part Function
Speed sensor NT (transmission revolution sensor) Shifting to only either 1st or 3rd gear is allowed.
Speed sensor NC (transmission revolution sensor)
·

The counter gear speed is determined based on the signals from the skid control ECU (speed sensor signals).

·

Shifting from 1st to 4th gear is allowed.


ATF temperature sensor Shifting from 1st to 4th gear is allowed.
TCM power supply (voltage is low) When the vehicle is being driven in 6th gear, the transaxle is fixed in 6th gear. When being driven in any of the gears from 1st to 5th, the transaxle is fixed in 5th gear.
CAN communication Shifting to only either 1st or 3rd gear is allowed.
Knock sensor Shifting from 1st to 4th gear is allowed.
Shift solenoid valve SL1, SL2, SL3 and SL4 The current to the malfunctioning shift solenoid valve is cut off and control is performed by operating the other normal shift solenoid valves. (Shift control in fail-safe mode is described in the table. For details, refer to Fail-Safe Control Chart.)

Shift Solenoid Valve Operation when Normal
Gear Position 1st 2nd 3rd 4th 5th 6th
Shift Solenoid Valve SL1 ON ON ON ON OFF OFF
Shift Solenoid Valve SL2 OFF OFF OFF ON ON ON
Shift Solenoid Valve SL3 OFF ON OFF OFF OFF ON
Shift Solenoid Valve SL4 OFF OFF ON OFF ON OFF

Fail-safe Control Chart
Gear Position under Normal Conditions 1st 2nd 3rd 4th 5th 6th
Shift Solenoid Valve SL1 ON Malfunction (without Fail-safe Control)* 1st 2nd 3rd 4th 4th 4th
OFF Malfunction (without Fail-safe Control) 1st to N 2nd to N 3rd to N 4th to N 5th 6th
Fail-safe Control during OFF Malfunction Fixed in 3rd or 5th
Shift Solenoid Valve SL2 ON Malfunction (without Fail-safe Control)* 1st to 4th 2nd to 4th 3rd to 4th 4th 5th 6th
OFF Malfunction (without Fail-safe Control) 1st 2nd 3rd 4th to 1st 5th to N 6th to N
Fail-safe Control during OFF Malfunction Fixed in 2nd or 3rd
Shift Solenoid Valve SL3 ON Malfunction (without Fail-safe Control)* 1st to 2nd 2nd 3rd 4th 5th 6th
OFF Malfunction (without Fail-safe Control) 1st 2nd to 1st 3rd 4th 5th 6th to N
Fail-safe Control during OFF Malfunction Fixed in 3rd
Shift Solenoid Valve SL4 ON Malfunction (without Fail-safe Control)* 3rd 3rd 3rd 4th 5th 5th
OFF Malfunction (without Fail-safe Control) 1st 2nd 3rd to 1st 4th 5th to N 6th
Fail-safe Control during OFF Malfunction Fixed in 2nd

HINT:

*: Fail-safe control is not activated when an ON malfunction occurs.