Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM3090E _52 Drivetrain _008436 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0047086 PARK / NEUTRAL POSITION SWITCH G

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Apply the parking brake and turn the ignition switch to ON.


b.

Depress the brake pedal and check that the engine can be started when the shift lever is in N or P, but does not start when the shift lever is in other positions.


c.

Check that the back-up light illuminates and the reverse warning buzzer sounds when the shift lever is in R, but do not function when the shift lever is in other positions.

If a malfunction or failure is found, check the park/ neutral position switch assembly for continuity.