This DTC is stored when the main body ECU (multiplex network body ECU) detects malfunctions in the lane departure warning camera.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B124C | Automatic High Beam Camera | Malfunction in lane departure warning camera (automatic high beam camera) | ·
Lane departure warning camera ·
Main body ECU (multiplex network body ECU) |
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this DTC.
When the lane departure warning camera is replaced with a new one, adjustment of the lane departure warning camera beam axis must be performed.
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>ADJUSTMENT
When replacing the main body ECU (multiplex network body ECU), make sure to replace it with a new one.
Clear the DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| DTC B124C is not output |
| DTC B124C is output |
DTC B124C is not output
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
DTC B124C is output
Clear the DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| Lane departure alert system DTCs are not output |
| Lane departure alert system DTCs are output |
Lane departure alert system DTCs are not output
Lane departure alert system DTCs are output
Temporarily replace the lane departure warning camera with a new or normally functioning one.
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>REMOVAL
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| DTC B124C is not output |
| DTC B124C is output |
DTC B124C is not output
DTC B124C is output