DESCRIPTION
Automatic headlight beam level control system data and the Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions, and then perform repairs.
CHECK DLC3
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
INSPECT BATTERY VOLTAGE
Measure the vehicle battery voltage.
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.