Home › Engine / Hybrid System › 1AD-FTV FUEL › FUEL TANK › 2012.12–2014.10
RM3090E _51 Engine / Hybrid System _008413 1AD-FTV FUEL _0048227 FUEL TANK A

1AD-FTV FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

Hide 77295D 2.INSTALL FUEL TUBE GROMMET

a.

Install the 3 fuel tube grommets to the fuel tank assembly.


Hide 77299A 3.INSTALL NO. 5 FUEL TUBE CLAMP

a.

Install the No. 5 fuel tube clamp to the fuel tank assembly.


Hide 77204A 4.INSTALL FUEL TANK RETURN TUBE

a.

Install the fuel tank return tube to the No. 5 fuel tube clamp and 3 fuel tube grommets.


Hide 77209D 5.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Install the fuel tank main tube sub-assembly to the No. 5 fuel tube clamp and 3 fuel tube grommets.


Hide 77010 6.INSTALL FUEL TANK VENT TUBE ASSEMBLY

a.

Install a new gasket onto the fuel tank vent tube assembly.


b.

Connect the 2 fuel hoses, slide the 2 clamps to secure the hoses and install the fuel tank vent tube assembly into the fuel tank assembly.

NOTICE:

Do not damage the fuel tank vent tube assembly.



Hide 77168A 7.INSTALL FUEL TANK VENT TUBE SET PLATE

a.

Install the fuel tank vent tube set plate with the 8 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 77204A 8.CONNECT FUEL TANK RETURN TUBE

a.
A271441C01
1.198,0.344 1.021,0.167 1.021,0.167 0.635,0.167 true 1.896,0.417 2.396,0.417 true 1.875,0.875 2.729,0.875 true 1.885,0.75 2.333,0.75 2.333,0.75 2.333,0.865 true 0.719,0.594 1.406,0.594 true 0.427,2.281 0.885,2.281 true 0.448,2.635 0.729,2.635 0.729,2.635 1.083,2.406 true 1.896,2.125 2.24,2.125 2.24,2.125 2.448,2.25 true 1.885,2.583 2.115,2.583 2.115,2.583 2.313,2.344 true 0.417,0.073 0.729,0.229 0.313,0.156 10 *1 2.448,0.323 2.76,0.479 0.313,0.156 10 *2 2.771,0.771 3.083,0.927 0.313,0.156 10 *4 0.26,2.531 0.573,2.688 0.313,0.156 10 *5 0.802,1.688 1.115,1.844 0.313,0.156 10 *a 2.26,1.708 2.573,1.865 0.313,0.156 10 *b 1.708,2.021 2.021,2.177 0.313,0.156 10 *5 0.24,2.177 0.552,2.333 0.313,0.156 10 *3 1.688,2.49 2,2.646 0.313,0.156 10 *3 0.521,0.5 0.833,0.656 0.313,0.156 10 *3
*1 Fuel Tube
*2 Fuel Tube Joint
*3 Tube Joint Clip
*4 O-Ring
*5 Collar
*a CORRECT
*b INCORRECT


Push the fuel tube joint into the plug of the fuel tank vent tube assembly, and then install the tube joint clip.

NOTICE:
·

Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joint is inserted securely.

·

Check that the fuel tube joint clip is on the collar of the fuel tube joint.

·

After installing the tube joint clip, check that the fuel tube joint cannot be pulled off.

·

Be careful not to damage any clip. If a clip is damaged, replace it.




Hide 77209D 9.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

A271441C01
1.198,0.344 1.021,0.167 1.021,0.167 0.635,0.167 true 1.896,0.417 2.396,0.417 true 1.875,0.875 2.729,0.875 true 1.885,0.75 2.333,0.75 2.333,0.75 2.333,0.865 true 0.719,0.594 1.406,0.594 true 0.427,2.281 0.885,2.281 true 0.448,2.635 0.729,2.635 0.729,2.635 1.083,2.406 true 1.896,2.125 2.24,2.125 2.24,2.125 2.448,2.25 true 1.885,2.583 2.115,2.583 2.115,2.583 2.313,2.344 true 0.417,0.073 0.729,0.229 0.313,0.156 10 *1 2.448,0.323 2.76,0.479 0.313,0.156 10 *2 2.771,0.771 3.083,0.927 0.313,0.156 10 *4 0.26,2.531 0.573,2.688 0.313,0.156 10 *5 0.802,1.688 1.115,1.844 0.313,0.156 10 *a 2.26,1.708 2.573,1.865 0.313,0.156 10 *b 1.708,2.021 2.021,2.177 0.313,0.156 10 *5 0.24,2.177 0.552,2.333 0.313,0.156 10 *3 1.688,2.49 2,2.646 0.313,0.156 10 *3 0.521,0.5 0.833,0.656 0.313,0.156 10 *3
*1 Fuel Tube
*2 Fuel Tube Joint
*3 Tube Joint Clip
*4 O-Ring
*5 Collar
*a CORRECT
*b INCORRECT


a.

Push the fuel tube joint into the plug of the fuel tank vent tube assembly, and then install the tube joint clip.

NOTICE:
·

Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joint is inserted securely.

·

Check that the fuel tube joint clip is on the collar of the fuel tube joint.

·

After installing the tube joint clip, check that the fuel tube joint cannot be pulled off.

·

Be careful not to damage any clip. If a clip is damaged, replace it.




Hide 77249 10.INSTALL FUEL EMISSION HOSE

a.

Attach the clamp and install the fuel emission hose.

Click hereEngine / Hybrid System>1AD-FTV FUEL>FUEL SYSTEM>PRECAUTION


Hide 77100 11.INSTALL FUEL TANK ASSEMBLY

a.

Set the fuel tank assembly on an engine lifter.


b.

Lift up the engine lifter.


c.

Connect the fuel sender gauge connector.

NOTICE:

Be careful not to cut the wire harness.



d.

Connect the wire harness to the 2 fuel tube grommets.


e.

Install the No. 1 fuel tank band sub-assembly with the 2 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


f.

Install the No. 1 fuel tank band sub-assembly LH with the 2 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


g.

Install the No. 2 fuel tank band sub-assembly with the 2 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 77269A 12.CONNECT FUEL TANK BREATHER HOSE

a.

Connect the fuel tank breather hose to the fuel tank assembly.

Click hereEngine / Hybrid System>1AD-FTV FUEL>FUEL SYSTEM>PRECAUTION


Hide 77213E 13.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.
A272265C02
2.49,3.177 3.01,3.177 true 1.521,3.083 1.698,3.417 1.698,3.417 1.698,3.615 false 1.615,3.667 1.927,3.823 0.313,0.156 10 *1 3.052,3.083 3.365,3.24 0.313,0.156 10 *2 1.354,2.25 1.667,2.406 0.313,0.156 10 *a 2.344,2.615 2.656,2.771 0.313,0.156 10 *c 0.531,3.583 0.844,3.74 0.313,0.156 10 90° 1.083,3.396 1.396,3.552 0.313,0.156 10 45° 0.188,2.75 0.5,2.906 0.313,0.156 10 *b
*1 Stopper
*2 Protrusion
*a Top
*b Front
*c Bottom of Fuel Tank


Connect the fuel tank to filler pipe hose to the fuel tank assembly and tighten the hose clamp.

HINT:

Make sure the hose clamp is oriented as shown in the illustration.



Hide 77204A 14.CONNECT FUEL TANK RETURN TUBE

a.

Connect the fuel tank return tube to the fuel pipe, and slide the clamp to secure it.


Hide 77209D 15.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>1AD-FTV FUEL>FUEL SYSTEM>PRECAUTION


Hide 46420 16.CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

a.

Connect the No. 2 parking brake cable assembly with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 58398F 17.INSTALL NO. 1 FLOOR UNDER COVER

a.

Attach the 2 clips and install the No. 1 floor under cover with the 2 nuts.


Hide 77641A 18.INSTALL NO. 1 FUEL TANK PROTECTOR

a.

Attach the 3 clips and install the No. 1 fuel tank protector with the nut.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 50819 19.INSTALL FRONT FLOOR COVER

a.

Install the front floor cover with the bolt and nut.

Torque:
for bolt : 12 N*m (122 kgf*cm, 9 ft.*lbf)
for nut : 6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Attach the 4 clips.