Home › Engine / Hybrid System › 2AD-FTV ENGINE CONTROL › MASS AIR FLOW METER
RM3090E _51 Engine / Hybrid System _008377 2AD-FTV ENGINE CONTROL _0048232 MASS AIR FLOW METER A

2AD-FTV ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

a.

Install the mass air flow meter sub-assembly with the 2 screws.

Torque:
1.0 N*m (10 kgf*cm, 9 in.*lbf)


b.

Connect the mass air flow meter sub-assembly connector.