Home › Engine / Hybrid System › 2AD-FTV ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR
RM3090E _51 Engine / Hybrid System _008377 2AD-FTV ENGINE CONTROL _0048233 INTAKE AIR TEMPERATURE SENSOR G

2AD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89424D 1.INSPECT INTAKE AIR TEMPERATURE SENSOR

a.

Partially immerse the intake air temperature sensor in water and warm up the water.


b.

Measure the resistance according to the value(s) in the table below.

A203929
5.865,1.354 5.708,1.354 5.708,1.354 5.458,1.708 false 4.625,0.802 4.948,1.01 0.323,0.208 8 30 4.625,0.948 4.948,1.156 0.323,0.208 8 20 4.625,1.146 4.948,1.354 0.323,0.208 8 10 4.625,1.396 4.948,1.604 0.323,0.208 8 5 4.625,1.573 4.948,1.781 0.323,0.208 8 3 4.625,1.708 4.948,1.917 0.323,0.208 8 2 4.625,1.927 4.948,2.135 0.323,0.208 8 1 4.625,2.469 4.948,2.677 0.323,0.208 8 0.2 4.625,2.323 4.948,2.531 0.323,0.208 8 0.3 4.625,2.156 4.948,2.365 0.323,0.208 8 0.5 4.625,2.688 4.948,2.896 0.323,0.208 8 0.1 5.135,2.969 5.313,3.156 0.177,0.188 8 0 5.344,2.969 5.542,3.135 0.198,0.167 8 20 5.594,2.969 5.802,3.146 0.208,0.177 8 40 5.854,2.969 6.052,3.156 0.198,0.188 8 60 6.115,2.969 6.333,3.156 0.219,0.188 8 80 6.396,2.979 6.667,3.156 0.271,0.177 8 100 4.844,2.969 5.073,3.135 0.229,0.167 8 -20 6.573,3.344 7.125,3.552 0.552,0.208 10 °C (°F) 4.844,3.104 5.073,3.281 0.229,0.177 8 (-4) 5.323,3.104 5.594,3.302 0.271,0.198 8 (68) 5.563,3.104 5.896,3.302 0.333,0.198 8 (104) 5.844,3.104 6.167,3.313 0.323,0.208 8 (140) 6.115,3.104 6.458,3.313 0.344,0.208 8 (176) 6.406,3.104 6.75,3.313 0.344,0.208 8 (212) 4.135,1.625 4.448,1.781 0.313,0.156 10 *1 5.552,3.458 5.865,3.615 0.313,0.156 10 *2 5.938,1.271 6.25,1.427 0.313,0.156 10 *3 1.979,0.448 2.292,0.604 0.313,0.156 10 *a 4.354,0.583 4.76,0.781 0.406,0.198 10 kΩ 5.073,3.104 5.333,3.313 0.26,0.208 8 (32)
*1 Resistance *2 Temperature
*3 Acceptable Range - -
*a Component without harness connected (Intake Air Temperature Sensor) - -


Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.21 to 2.65 kΩ
60°C (140°F) 0.54 to 0.62 kΩ


NOTICE:

When checking the intake air temperature sensor in water, keep the terminals dry. After the check, wipe the intake air temperature sensor dry.


If the result is not as specified, replace the intake air temperature sensor.