Home › Drivetrain › EA64 MANUAL TRANSMISSION / TRANSAXLE › INPUT SHAFT
RM3090E _52 Drivetrain _008755 EA64 MANUAL TRANSMISSION / TRANSAXLE _0048556 INPUT SHAFT A

EA64 MANUAL TRANSMISSION / TRANSAXLE  INPUT SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33311P 1.REMOVE REAR INPUT SHAFT BEARING SHAFT SNAP RING

a.
C112390

Using a snap ring expander, remove the rear input shaft bearing shaft snap ring from the input shaft.


Hide 33311E 2.REMOVE REAR INPUT SHAFT RADIAL BALL BEARING

a.
C112391
1.493,0.036 1.79,0.377 0.297,0.341 10 SST 1.481,0.122 1.395,0.122 1.395,0.122 1.327,0.475 false

Using SST, remove the rear input shaft radial ball bearing from the input shaft.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09631-20031  


Hide 33337 3.REMOVE 6TH GEAR SUB-ASSEMBLY

a.
C278090
1.448,1.417 1.948,1.417 false 2.083,1.354 2.542,1.552 0.458,0.198 10 SST

Using SST and press, press out the 6th gear sub-assembly from the input shaft.

SST
09950-00020  


Hide 33333 4.REMOVE 3RD GEAR

a.
C117923
0.231,0.408 0.54,0.746 0.309,0.338 10 SST 0.592,0.489 0.729,0.489 0.729,0.489 0.822,1.21 false

Using SST and press, press out the 3rd gear from the input shaft.

SST
09950-00020  


b.
C112450

Remove the spacer from the input shaft.


Hide 33334 5.REMOVE 4TH GEAR

a.
C112393
0.088,0.322 0.384,0.655 0.296,0.333 10 SST 0.456,0.408 0.57,0.408 0.57,0.408 0.758,0.974 false

Using SST and press, press out the 4th gear from the input shaft.

SST
09950-00020  


Hide 33311T 6.REMOVE INPUT SHAFT SNAP RING

a.
C112473

Using 2 screwdrivers and a hammer, tap out the input shaft snap ring from the input shaft.

NOTICE:

Use a piece of cloth to prevent the snap ring from flying off.



Hide 33311A 7.REMOVE FRONT INPUT SHAFT BEARING

a.
C112394
0.061,0.254 0.415,0.6 0.354,0.346 10 SST 0.433,0.345 0.576,0.345 0.576,0.345 0.838,1.069 false

Using SST and press, remove the front input shaft bearing from the input shaft.

SST
09950-00020