33237
1.INSTALL RELEASE HEAD
Install the release head to the shift and select lever shaft.
| *a | Depth |
Using a 5 mm pin punch and hammer, tap in the slotted spring pin to the shift and select lever shaft.
-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)
Make sure the installation direction is correct.
33926
2.INSTALL FRONT INNER SHIFT LEVER
Install the front inner shift lever to the shift and select lever shaft.
| *a | Depth |
Using a 5 mm pin punch and hammer, tap in the front inner shift lever and slotted spring pin to the shift and select lever shaft.
-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)
Make sure the installation direction is correct.
33252A
3.INSTALL INNER NO. 2 SHIFT LEVER
Install the inner No. 2 shift lever to the shift and select lever shaft.
| *a | Depth |
Using a 5 mm pin punch and hammer, tap in the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.
0 to 0.6 mm (0 to 0.0236 in.)
Make sure the installation direction is correct.