51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
12611
3.REMOVE NO. 1 ENGINE COVER
25625
4.REMOVE EGR VALVE BRACKET
Disconnect the 2 connectors and detach the 2 wire harness clamps.
Remove the 3 bolts and EGR valve bracket.
16295
5.DISCONNECT NO. 7 WATER BY-PASS HOSE
Slide the clamp and disconnect the No. 7 water by-pass hose from the electric EGR control valve assembly.
16296
6.DISCONNECT NO. 8 WATER BY-PASS HOSE
Slide the clamp and disconnect the No. 8 water by-pass hose from the electric EGR control valve assembly.
25602
7.REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY
Disconnect the electric EGR control valve connector.
| *1 | Nut |
Remove the 3 bolts, 2 nuts and No. 2 EGR pipe sub-assembly.
Remove the 2 gaskets.
25800
8.REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY
Remove the electric EGR control valve assembly and gasket.