Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM › 2012.12–2015.10
RM3090E _54 Brake _008767 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0048750 ANTI-LOCK BRAKE SYSTEM U

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  FAIL-SAFE CHART  


FAIL-SAFE OPERATION


·

If there is a problem with sensor signals or actuator systems, the skid control ECU (brake actuator assembly) prohibits power supply to the brake actuator assembly and terminates ABS control. The ABS control will be prohibited, but EBD control will continue as much as possible. If EBD control is impossible, the brake warning light will come on to warn the driver.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM

·

If system components have any malfunctions before starting control, immediately stop the operation. If system components have any malfunctions during control, gradually stop the control so as not to trigger a sudden change in vehicle conditions. If it is impossible to control the systems, the warning light comes on to inform the driver of termination of the systems.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM



HINT:
·

If the ABS system malfunctions, the brake system operates normally without the ABS system.

·

If the brake booster encounters a malfunction, brake performance is gradually lost and ABS control is prohibited.



ABS and EBD Systems
Item Operation
ABS system ABS control prohibited
EBD system ABS and EBD control prohibited