Home › Engine / Hybrid System › 2AD-FTV EMISSION CONTROL › MONOLITHIC CONVERTER(for CCo)
RM3090E _51 Engine / Hybrid System _008737 2AD-FTV EMISSION CONTROL _0048715 MONOLITHIC CONVERTER(for CCo) A

2AD-FTV EMISSION CONTROL  MONOLITHIC CONVERTER(for CCo)  INSTALLATION  


PROCEDURE

Hide 25051 1.INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

a.

Install a new gasket to the turbocharger sub-assembly.

HINT:
A197499C03
1.26,1.917 2.083,1.917 true 2.125,1.823 2.281,2.021 0.156,0.198 10 A
V100135

Top


Make sure that the part labeled A is facing downwards as shown in the illustration.



b.
A197484

Temporarily install the exhaust manifold converter sub-assembly with the 3 new nuts.


c.
A197503

Temporarily install the No. 2 exhaust manifold stay with the 2 bolts and nut.


d.
A197502

Temporarily install the No. 2 manifold stay with the 3 bolts.


e.
A197504

Temporarily install the manifold stay with the bolt and nut.


f.
A296000N01
1.302,0.688 1.458,0.885 0.156,0.198 10 1 1.292,1.771 1.448,1.969 0.156,0.198 10 2

Tighten the 2 bolts of the No. 2 exhaust manifold stay in the order shown in the illustration.

Torque:
56 N*m (571 kgf*cm, 41 ft.*lbf)


g.

Tighten the 3 nuts of the exhaust manifold converter sub-assembly.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)

NOTICE:

Tighten the nuts while pressing the exhaust manifold converter sub-assembly against the engine.



h.
A201858

Tighten the nut of the No. 2 exhaust manifold stay.

Torque:
56 N*m (571 kgf*cm, 41 ft.*lbf)


i.
A201859

Tighten the bolt of the No. 2 manifold stay shown in the illustration.

Torque:
56 N*m (571 kgf*cm, 41 ft.*lbf)

NOTICE:

Tighten the bolt while pressing the No. 2 manifold stay against the exhaust manifold converter sub-assembly and cylinder block sub-assembly.



j.
A201860

Tighten the 2 bolts of the No. 2 manifold stay shown in the illustration.

Torque:
56 N*m (571 kgf*cm, 41 ft.*lbf)


k.
A201861

Tighten the bolt of the manifold stay.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)

NOTICE:

Tighten the bolt while pressing the manifold stay against the exhaust manifold converter sub-assembly and cylinder block sub-assembly.



l.
A201862

Tighten the nut of the manifold stay.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 25586 2.INSTALL NO. 1 MANIFOLD CONVERTER INSULATOR

a.

Install the No. 1 manifold converter insulator with the 4 bolts.

Torque:
29 N*m (291 kgf*cm, 21 ft.*lbf)