Home › Engine / Hybrid System › 2AD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR(for DPF)
RM3090E _51 Engine / Hybrid System _008737 2AD-FTV EMISSION CONTROL _0048754 EXHAUST GAS TEMPERATURE SENSOR(for DPF) G

2AD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for DPF)  INSPECTION  


PROCEDURE

Hide 89425A 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 560 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the exhaust gas temperature sensor.


Hide 89425B 2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 560 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the No. 2 exhaust gas temperature sensor.


If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.