Home › Engine / Hybrid System › 2AD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR(for DPF)
RM3090E _51 Engine / Hybrid System _008737 2AD-FTV EMISSION CONTROL _0048754 EXHAUST GAS TEMPERATURE SENSOR(for DPF) A

2AD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for DPF)  REMOVAL  


PROCEDURE

Hide 25586 2.REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

Hide 25051 3.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Hide 89425A 4.REMOVE EXHAUST GAS TEMPERATURE SENSOR

NOTICE:

If the exhaust gas temperature sensor is dropped, replace it with a new one.


a.
A197491

Detach the exhaust gas temperature sensor connector clamp.


b.

Using a 14 mm union nut wrench, loosen the union nut.


c.

Remove the nut, clamp and exhaust gas temperature sensor.


Hide 89425B 5.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

NOTICE:

If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.


a.
A197493

Detach the No. 2 exhaust gas temperature sensor connector clamp.


b.

Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.