26100
1.INSPECT DIESEL THROTTLE BODY ASSEMBLY
Check that the there is no sludge accumulating around the diesel throttle body assembly.
When cleaning the diesel throttle body assembly, use a piece of cloth soaked with cleaning solvent. Spraying the solvent directly onto this part or soaking the part in solvent may damage it.
| *a | Component without harness connected (Diesel Throttle Body Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (M-) - 2 (M+) | 20°C (68°F) | 0.3 to 100 Ω |
Be sure to move the throttle valve when measuring the resistance.
If the result is not as specified, replace the diesel throttle body assembly.