Home › Engine / Hybrid System › 1AD-FTV ENGINE CONTROL › MASS AIR FLOW METER › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008729 1AD-FTV ENGINE CONTROL _0048786 MASS AIR FLOW METER A

1AD-FTV ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

a.

Install the mass air flow meter sub-assembly with the 2 screws.

Torque:
1.0 N*m (10 kgf*cm, 9 in.*lbf)


b.

Connect the mass air flow meter sub-assembly connector.