Home › Engine / Hybrid System › 1AD-FTV ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008729 1AD-FTV ENGINE CONTROL _0048791 MANIFOLD ABSOLUTE PRESSURE SENSOR A

1AD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421C 1.INSTALL DIESEL TURBO PRESSURE SENSOR

a.
A201856C02
0.896,2.896 1,3.177 1,3.177 1.167,3.177 true 1.219,3.094 1.375,3.25 0.156,0.156 10 *1
*1 Protrusion


Install the diesel turbo pressure sensor with the bolt.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)

NOTICE:

Make sure the protrusion of the gas filter bracket is inserted into the hole of the diesel turbo pressure sensor.



b.

Connect the diesel turbo pressure sensor connector.


c.

Connect the vacuum hose.