Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0048748 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CD Sound Skips  


PROCEDURE

1.CHECK CD
a.
I100152

Check that the CD is not deformed or cracked.


Result:
Proceed to
No deformation or cracks on the CD
Deformation or cracks on the CD



No deformation or cracks on the CD

2.CHECK CD

Deformation or cracks on the CD

END (CD IS DEFECTIVE)

2.CHECK CD
a.
I100151

Check the CD.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.


HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
The CD is clean
The CD is not clean



The CD is clean

3.CHECK CD

The CD is not clean

END (CD IS DEFECTIVE)

3.CHECK CD
a.

Replace the CD with a known good one and check that the malfunction disappears.


Result:
Proceed to
Malfunction disappears
Malfunction appears



Malfunction disappears

END (CD IS DEFECTIVE)

Malfunction appears

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the radio and display receiver assembly installation condition.

i.

Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.




Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY