Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.
The cellular phone is registered as a connected device and "Bluetooth" settings are correct.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the cellular phone functions.
The cellular phone is unable to call under any of the following conditions:
The cellular phone is locked.
The phonebook is being transferred.
The line is crossed.
The cellular phone is outside service range.
The cellular phone's power is off.
The cellular phone's battery is low.
The cellular phone is not connected via "Bluetooth".
| Proceed to |
|---|
| None of the above conditions exist |
| Any of the above conditions are met |
None of the above conditions exist
Any of the above conditions are met
Place the cellular phone close to the radio and display receiver assembly.
Set the cellular phone so that it can receive calls.
Check if the cellular phone has reception according to the radio and display receiver assembly.
| Proceed to |
|---|
| The cellular phone has reception |
| The cellular phone does not have reception |
The cellular phone has reception
The cellular phone does not have reception
Check if the cellular phone can make a call.
The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.
| Proceed to |
|---|
| Cellular phone can make a call |
| Cellular phone cannot make a call |
Cellular phone can make a call
Cellular phone cannot make a call
Restart the cellular phone.
Register the cellular phone as a connected device again and check that the malfunction disappears.
| Proceed to |
|---|
| Malfunction disappears |
| Malfunction appears |
Malfunction disappears
Malfunction appears
Check if the cellular phone is "Bluetooth" compatible.
Some versions of "Bluetooth" compatible cellular phones may not function.
| Proceed to |
|---|
| The phone is "Bluetooth" compatible |
| The phone is not "Bluetooth" compatible |
The phone is "Bluetooth" compatible
The phone is not "Bluetooth" compatible