Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.12–2015.10
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0048748 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  B15F6  Main Body ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the audio and visual system vehicle customization screen.

HINT:

The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the display screen:

·

Power door lock control system

·

Wireless door lock control system (w/ Entry and Start System)

·

Wireless door lock control system (w/o Entry and Start System)

·

Lighting system (EXT)



DTC No. Detection Item DTC Detection Condition Trouble Area
B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction Main body ECU (multiplex network body ECU) vehicle setting processing error.
·

CAN communication system

·

Power door lock control system

·

Wireless door lock control system (w/ Entry and Start System)

·

Wireless door lock control system (w/o Entry and Start System)

·

Lighting system (EXT)

·

Main body ECU (multiplex network body ECU)

·

Radio and display receiver assembly



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Proceed to
No DTCs are output
CAN DTCs are output (for LHD)
CAN DTCs are output (for RHD)



No DTCs are output

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

CAN DTCs are output (for LHD)

CAN DTCs are output (for RHD)

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check if the power door lock control system is functioning normally.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.


OK:

No malfunctions are present in the power door lock control system.



Result:
Proceed to
OK (w/ Entry and Start System)
OK (w/o Entry and Start System)
NG



OK (w/ Entry and Start System)

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

OK (w/o Entry and Start System)

4.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)
a.

Check if the wireless door lock control system (w/ Entry and Start System) is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system (w/ Entry and Start System).


OK:

No malfunctions are present in the wireless door lock control system (w/ Entry and Start System).



Result:
Proceed to
OK
NG



OK

5.CHECK LIGHTING SYSTEM (EXT)

NG

4.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
a.

Check if the wireless door lock control system (w/o Entry and Start System) is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system (w/o Entry and Start System).


OK:

No malfunctions are present in the wireless door lock control system (w/o Entry and Start System).



b.

Proceed to the next step based on the check result.


Result:
Proceed to
OK
NG



OK

5.CHECK LIGHTING SYSTEM (EXT)

NG

5.CHECK LIGHTING SYSTEM (EXT)
a.

Check if the lighting system (EXT) is malfunctioning.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the lighting system (EXT).



Result:
Proceed to
No malfunctions are present in the lighting system (EXT)
Malfunctions are present in the lighting system (EXT)



No malfunctions are present in the lighting system (EXT)

6.CHECK CUSTOMIZE ITEMS

Malfunctions are present in the lighting system (EXT)

6.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Settings" screen.


b.

Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

HINT:

These items shown as customizable via the audio and visual system vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.


i.

To match-up the items in the display screen with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the display screen.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


ii.

To match-up the items in the display screen with the items on the GTS, check the customize parameters list for the wireless door lock control system (w/ Entry and Start System) related items that can be customized via the display screen.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>CUSTOMIZE PARAMETERS


iii.

To match-up the items in the display screen with the items on the GTS, check the customize parameters list for the lighting system (EXT) related items that can be customized via the display screen.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS



c.

Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the display screen.

OK:

The items available for customization via the display screen can be customized successfully using the GTS.



Result:
Proceed to
OK
NG (for LHD)
NG (for RHD)



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG (for LHD)

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG (for RHD)

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)