Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › CANISTER(w/o Canister Pump Module)
RM3090E _51 Engine / Hybrid System _008398 2AR-FE EMISSION CONTROL _0048949 CANISTER(w/o Canister Pump Module) G

2AR-FE EMISSION CONTROL  CANISTER(w/o Canister Pump Module)  INSPECTION  


PROCEDURE

Hide 1.CHECK CHARCOAL CANISTER ASSEMBLY

a.
A182969
1.844,0.125 1.667,0.125 1.667,0.125 1.771,0.646 true 2.833,0.188 2.708,0.188 2.708,0.188 2.469,0.896 true 1.615,1.865 1.865,1.865 1.865,1.865 2.042,1.313 true 1.885,0.052 2.198,0.208 0.313,0.156 10 *1 2.875,0.104 3.188,0.26 0.313,0.156 10 *2 1.427,1.792 1.74,1.948 0.313,0.156 10 *3
*1 Port A
*2 Port B
*3 Port C
V100135

Air


Close port C, apply compressed air to port A and check that air flows out from port B.

If the result is not as specified, replace the fuel suction plate sub-assembly.


b.
A182970
1.448,1.833 1.698,1.833 1.698,1.833 1.885,1.292 true 1.917,0.146 1.771,0.146 1.771,0.146 1.615,0.635 true 2.875,1.177 2.635,1.177 2.635,1.177 2.323,0.885 true 1.969,0.073 2.281,0.229 0.313,0.156 10 *1 2.917,1.104 3.229,1.26 0.313,0.156 10 *2 1.271,1.76 1.583,1.917 0.313,0.156 10 *3
*1 Port A
*2 Port B
*3 Port C
V100135

Air


Close port C, apply compressed air to port B and check that air flows out from port A.

If the result is not as specified, replace the fuel suction plate sub-assembly.


c.
A182971
2.813,1.083 2.625,1.083 2.625,1.083 2.313,0.885 true 1.479,1.854 1.625,1.854 1.625,1.854 1.896,1.292 true 2.031,0.146 1.802,0.146 1.802,0.146 1.646,0.646 true 2.073,0.073 2.385,0.229 0.313,0.156 10 *1 2.844,1.01 3.156,1.167 0.313,0.156 10 *2 1.292,1.792 1.604,1.948 0.313,0.156 10 *3
*1 Port A
*2 Port B
*3 Port C
V100135

Air


Apply compressed air to port B and check that air flows out from port A and port C.

If the result is not as specified, replace the fuel suction plate sub-assembly.


d.
A182972
2.115,0.135 1.927,0.135 1.927,0.135 1.823,0.51 true 2.688,1.094 2.438,1.094 2.438,1.094 2.292,0.75 true 1.583,1.719 1.708,1.719 1.708,1.719 2.073,1.167 true 2.146,0.063 2.458,0.219 0.313,0.156 10 *1 2.719,1.021 3.031,1.177 0.313,0.156 10 *2 1.396,1.646 1.708,1.802 0.313,0.156 10 *3
*1 Port A
*2 Port B
*3 Port C


Close ports A and C, and apply compressed air to port B to check for leaks.

If the result is not as specified, replace the fuel suction plate sub-assembly.