Home › Engine / Hybrid System › 1AD-FTV ENGINE MECHANICAL › CYLINDER HEAD › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008733 1AD-FTV ENGINE MECHANICAL _0049236 CYLINDER HEAD A

1AD-FTV ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

HINT:

Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


a.

Place the cylinder head sub-assembly on a wooden block.


b.
A111290
1.65,0.224 1.943,0.387 0.293,0.163 10 SST 2.27,0.626 2.093,0.319 2.093,0.319 2.003,0.319 false

Using SST, compress the inner compression spring and remove the valve spring retainer lock.

SST
09202-70020  


c.

Remove the valve spring retainer, inner compression spring, valve spring seat plate washer and intake valve.


Hide 13715 2.REMOVE EXHAUST VALVE

HINT:

Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


a.

Place the cylinder head sub-assembly on a wooden block.


b.
A111289
1.378,0.162 1.701,0.337 0.323,0.175 10 SST 1.064,0.394 1.262,0.242 1.262,0.242 1.353,0.242 false

Using SST, compress the inner compression spring and remove the valve spring retainer lock.

SST
09202-70020  


c.

Remove the valve spring retainer, inner compression spring, valve spring seat plate washer and exhaust valve.


Hide 13711E 3.REMOVE VALVE STEM OIL SEAL

a.
A111291

Using needle-nose pliers, remove the valve stem oil seal.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A111292

Using compressed air and a magnet hand, remove the valve spring seats by blowing air.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG WITH HEAD

a.
A203795

Using a 6 mm hexagon wrench, remove the 4 No. 1 straight screw plugs.


Hide 6.REMOVE CYLINDER HEAD STUD BOLT

HINT:

If a cylinder head stud bolt is deformed or the threads are damaged, replace it.