Home › Engine / Hybrid System › 2AD-FHV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR
RM3090E _51 Engine / Hybrid System _008736 2AD-FHV EMISSION CONTROL _0049294 EXHAUST GAS TEMPERATURE SENSOR G

2AD-FHV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89425 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 560 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the exhaust gas temperature sensor.


Hide 89425A 2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 560 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the No. 2 exhaust gas temperature sensor.


If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.