Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.12–2014.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  CD/DVD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.


Result:
Proceed to
No deformation or cracks on the disc
Deformation or cracks on the disc



No deformation or cracks on the disc

2.CLEAN DISC AND RECHECK

Deformation or cracks on the disc

CHANGE DISC

2.CLEAN DISC AND RECHECK
a.
I100151

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE:

Do not use a conventional record cleaner or anti-static preservative.



Result:
Proceed to
Malfunction disappears
Malfunction does not disappear



Malfunction disappears

END (DISC WAS DIRTY)

Malfunction does not disappear

3.REPLACE DISC AND RECHECK
3.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one.


b.

Check that the malfunction disappears.


Result:
Proceed to
Malfunction disappears
Malfunction does not disappear



Malfunction disappears

END (DISC IS DEFECTIVE)

Malfunction does not disappear

4.CHECK NAVIGATION ECU SUB-ASSEMBLY
4.CHECK NAVIGATION ECU SUB-ASSEMBLY
a.

Check the navigation ECU sub-assembly installation condition.

i.

Check that the navigation ECU sub-assembly is properly installed.



Result:
Proceed to
The navigation ECU sub-assembly is properly installed
The navigation ECU sub-assembly is not properly installed



The navigation ECU sub-assembly is properly installed

The navigation ECU sub-assembly is not properly installed

REINSTALL NAVIGATION ECU SUB-ASSEMBLY PROPERLY