Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.12–2014.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  Touch Panel Switch does not Function  


PROCEDURE

1.CHECK DISPLAY
a.

Check if there is any foreign matter caught between the display and exterior frame of the display.

OK:

No foreign matter is caught between the display and exterior frame of the display.


HINT:

If there is foreign matter between the display and exterior frame of the display, the touch panel will remain pressed, preventing touch switch operation.



Result:
Proceed to
OK
NG



OK

2.CHECK TOUCH PANEL

NG

REMOVE FOREIGN MATTER

2.CHECK TOUCH PANEL
a.

Check for foreign matter on the display.


Result:
Proceed to
The display is clean
The display is not clean



The display is clean

3.CHECK TOUCH SWITCH (OPERATION CHECK)

The display is not clean

CLEAN DISPLAY AND RECHECK TOUCH PANEL

3.CHECK TOUCH SWITCH (OPERATION CHECK)
a.
E176521

Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>OPERATION CHECK


b.

Touch the display in the area where the switch malfunction occurs.


Result:
Proceed to
A "+" mark appears at the touched position
A "+" mark does not appear at the touched position



A "+" mark appears at the touched position

A "+" mark does not appear at the touched position

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE