Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.12–2014.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  Cellular Phone cannot Make Outgoing/Incoming Calls  


PROCEDURE

1.CHECK "Bluetooth" SETTINGS
a.

Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.

OK:

The cellular phone is registered as a connected device and "Bluetooth" settings are correct.



Result:
Proceed to
OK
NG



OK

2.CHECK SETTINGS AND CONDITIONS

NG

SET SETTINGS CORRECTLY

2.CHECK SETTINGS AND CONDITIONS
a.

Check the cellular phone functions.

HINT:

The cellular phone is unable to call under any of the following conditions:

·

The cellular phone is locked.

·

The phonebook is being transferred.

·

The line is crossed.

·

The cellular phone is outside service range.

·

The power is off.

·

The battery is low.

·

The cellular phone is not connected via "Bluetooth".




Result:
Proceed to
None of the above conditions exist
One or more of the above conditions exist



None of the above conditions exist

3.CHECK RECEPTION

One or more of the above conditions exist

SET CORRECTLY

3.CHECK RECEPTION
a.

Place the cellular phone close to the navigation ECU sub-assembly.


b.

Set the cellular phone so that it can receive calls.


c.

Check if the cellular phone has reception according to the navigation ECU sub-assembly.


Result:
Proceed to
The cellular phone has reception
The cellular phone does not has reception



The cellular phone has reception

END

The cellular phone does not has reception

4.CHECK CELLULAR PHONE
4.CHECK CELLULAR PHONE
a.

Check if the cellular phone can make a call.

HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.


Result:
Proceed to
Cellular phone can make a call
Cellular phone cannot make a call




Cellular phone can make a call

5.RESTART CELLULAR PHONE

Cellular phone cannot make a call

REPLACE CELLULAR PHONE

5.RESTART CELLULAR PHONE
a.

Restart the cellular phone.


b.

Register the cellular phone as a connected device again and check that the malfunction disappears.


Result:
Proceed to
Malfunction disappears
Malfunction does not disappear



Malfunction disappears

END

Malfunction does not disappear

6.CHECK CELLULAR PHONE
6.CHECK CELLULAR PHONE
a.

Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.


Result:
Proceed to
The phone is "Bluetooth" compatible
The phone is not "Bluetooth" compatible




The phone is "Bluetooth" compatible

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

The phone is not "Bluetooth" compatible

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)