Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.12–2014.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted  


CAUTION / NOTICE / HINT

HINT:

If an outlet of the air conditioning system is facing the microphone, noise may be recorded and the other caller may not be able to hear your voice properly.


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller can hear your voice properly.

HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



Result:
Proceed to
Your voice can be heard properly
Your voice cannot be heard properly



Your voice can be heard properly

2.CHECK SETTINGS

Your voice cannot be heard properly

REPLACE CELLULAR PHONE

2.CHECK SETTINGS
a.
E274393C01
0.083,0.104 0.396,0.302 0.313,0.198 10 false *a
*a Example


Display the "Call" screen.


b.

Check that the "Mute" switch is not set to on.


Result:
Proceed to
"Mute" switch is not set to on
"Mute" switch is set to on



"Mute" switch is not set to on

3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

"Mute" switch is set to on

TURN "Mute" SWITCH OFF

3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E274390

Enter the "Microphone&Voice Recognition Check" screen. Refer to Check Mic&Voice Recognition in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>OPERATION CHECK


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Push the recording switch and perform voice recording.

HINT:
·

Voice can be recorded for up to 5 seconds.

·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.




d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.


Result:
Proceed to
All check results are normal
Some check results are not normal



All check results are normal

Some check results are not normal

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE