Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.12–2014.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  Portable Player cannot be Connected Manually/Automatically  


CAUTION / NOTICE / HINT

HINT:

Some versions of "Bluetooth" compatible audio players may not function, or the function may be limited using the navigation ECU sub-assembly, even if the portable audio player itself can play files.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>SYSTEM DESCRIPTION


PROCEDURE

1.CHECK CONNECTED DEVICE SETTINGS
a.
E226262C04
0.094,0.081 0.246,0.229 0.152,0.148 10 *a
*a Example


Display the "Connect Portable Player" screen.


b.

Check if the portable player is registered as a connected device.

NOTICE:

If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.


HINT:

Only 5 portable players can be registered.



Result:
Proceed to
The portable player is registered as a connected device
The portable player is not registered as a connected device



The portable player is registered as a connected device

2.CHECK SYMPTOMS

The portable player is not registered as a connected device

REGISTER PORTABLE PLAYER AS CONNECTED DEVICE

2.CHECK SYMPTOMS
a.

Check the connection condition between the portable player and navigation ECU sub-assembly.

HINT:

The portable player cannot be connected under any of the following conditions:

·

The portable player is connected to another device.

·

The navigation ECU sub-assembly has cleared the portable player registration.

·

The portable player is off.




Result:
Proceed to
The portable player cannot be connected automatically
The portable player cannot be connected manually



The portable player cannot be connected automatically

3.CHECK AUTOMATIC CONNECTION SETTINGS

The portable player cannot be connected manually

4.CHECK PORTABLE PLAYER STATUS
3.CHECK AUTOMATIC CONNECTION SETTINGS
a.
E226248C04
0.096,0.08 0.247,0.23 0.15,0.15 10 *a
*a Example


Display the "Detailed Bluetooth Settings" screen.


b.

Check automatic connection settings of the "Bluetooth" audio.

i.

Check if "On" is displayed for "Bluetooth Power" on the "Detailed Bluetooth Settings" screen.



Result:
Proceed to
"On" is displayed for "Bluetooth Power"
"On" is not displayed for "Bluetooth Power"



"On" is displayed for "Bluetooth Power"

4.CHECK PORTABLE PLAYER STATUS

"On" is not displayed for "Bluetooth Power"

CHANGE "Bluetooth" POWER TO "On"

4.CHECK PORTABLE PLAYER STATUS
a.

Check the status of the portable player.

i.

Check that the portable player is not in standby mode.


ii.

Check that the portable player is not connected to another device (headphones etc.).

OK:

The portable player is not in standby mode and not connected to another device (headphones etc.).




Result:
Proceed to
OK
NG



OK

5.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

NG

TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)

5.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
a.

Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

OK:

The portable player can be connected manually/automatically.



Result:
Proceed to
OK
NG



OK

6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

NG

PORTABLE PLAYER IS NOT COMPATIBLE

6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES
a.

Remove additional devices which use radio waves.


b.

Check if the portable player can be connected manually/automatically.

OK:

The portable player can be connected manually/automatically.



Result:
Proceed to
OK
NG



OK

END (ADDITIONAL DEVICES ARE DEFECTIVE)

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE