These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C0 | Short in GPS Antenna | Navigation antenna error | ·
Navigation antenna cord ·
Navigation antenna assembly ·
Navigation ECU sub-assembly |
| B15C1 | Open in GPS Antenna | Error of the power source to the navigation antenna | ·
Navigation antenna cord ·
Navigation antenna assembly ·
Navigation ECU sub-assembly |
Check if the navigation antenna cord is securely connected to the navigation ECU sub-assembly.
| Proceed to |
|---|
| Navigation antenna cord is securely connected |
| Navigation antenna cord is not securely connected |
Navigation antenna cord is securely connected
Navigation antenna cord is not securely connected
Replace the navigation antenna assembly with a known good one and check if the same DTC is output again.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION ANTENNA>REMOVAL
Clear the DTCs.
Recheck for DTCs and check if the same DTC is output again.
| Proceed to |
|---|
| No DTCs are output |
| DTCs are output |
No DTCs are output
DTCs are output