Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55054
1.REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
Detach the clip and remove the glove compartment door stopper sub-assembly.
55447C
2.REMOVE NO. 2 SWITCH HOLE BASE
Detach the 3 clips and claw and remove the No. 2 switch hole base.
55539
3.REMOVE SPARE SWITCH HOLE COVER
except 4WD/AWD:
Detach the 2 claws and remove the spare switch hole cover.
w/o Power Back Door:
Detach the 2 claws and remove the spare switch hole cover.
w/o Downhill Assist Control:
Detach the 2 claws and remove the spare switch hole cover.
w/o Power Back Door:
Detach the 2 claws and remove the spare switch hole cover.
84725A
4.REMOVE DIFFERENTIAL LOCK SWITCH (for 4WD/AWD)
84930
5.REMOVE DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)
for LHD:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR CONTROL SWITCH(for LHD)>REMOVAL
for RHD:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR CONTROL SWITCH(for RHD)>REMOVAL
84988H
6.REMOVE DOWNHILL ASSIST CONTROL SWITCH (w/ Downhill Assist Control)
84965
7.REMOVE POWER BACK DOOR MAIN SWITCH (w/ Power Back Door)
899A0
8.REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Entry and Start System)
89611
9.REMOVE PUSH START SWITCH (for RHD with Entry and Start System)
86101
10.REMOVE ANTENNA CORD SUB-ASSEMBLY