Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86101
1.INSTALL ANTENNA CORD SUB-ASSEMBLY
89611
2.INSTALL PUSH START SWITCH (for RHD with Entry and Start System)
899A0
3.INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Entry and Start System)
84965
4.INSTALL POWER BACK DOOR MAIN SWITCH (w/ Power Back Door)
84988H
5.INSTALL DOWNHILL ASSIST CONTROL SWITCH (w/ Downhill Assist Control)
84930
6.INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)
84725A
7.INSTALL DIFFERENTIAL LOCK SWITCH (for 4WD/AWD)
55539
8.INSTALL SPARE SWITCH HOLE COVER
Use the same procedure for all the spare switch hole covers.
Attach the 2 claws to install the spare switch hole cover.
55447C
9.INSTALL NO. 2 SWITCH HOLE BASE
Attach the claw and 3 clips to install the No. 2 switch hole base.
55054
10.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
Attach the clip to install the glove compartment door stopper sub-assembly.