Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049316 FRONT CONSOLE BOX A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles..

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 58901A 1.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

a.

Install the rear console box sub-assembly with the 4 bolts and 2 screws.


Hide 55434B 2.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

a.
B337860

Attach the 5 clips to install the lower center instrument panel finish panel.


Hide 58815A 3.INSTALL CONSOLE BOX CARPET

a.

Install the console box carpet.


Hide 58805C 4.INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

a.

Attach the 4 claws to install the upper rear console panel sub-assembly.


Hide 55395C 5.INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

a.

Attach the guide and 2 clips to install the inner No. 1 instrument panel bracket cover LH.


Hide 55394D 6.INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH

a.

Attach the guide and 2 clips to install the inner No. 1 instrument panel bracket cover RH.


Hide 58804A 7.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

a.

Attach the 12 clips to install the upper console panel sub-assembly.

B337854


b.
B337856

Lower the shift lever boot to connect it to the shift lever assembly.


Hide 58804A 8.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (except Manual Transaxle)

a.

Connect the connector.


b.

Attach the 12 clips to install the upper console panel sub-assembly.

B337851


Hide 58809B 9.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

a.
B337847

Attach the 9 clips and claw to install the parking brake hole cover sub-assembly.


Hide 33504F 10.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

a.
B337843

Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.


Hide 33504F 11.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (except Manual Transaxle)

a.
B337845

Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.