Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049316 FRONT CONSOLE BOX A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 58808 1.INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)

a.

Attach the 4 hooks to install the shifting hole cover to the upper console panel sub-assembly.


Hide 58908A 2.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

a.

Install the console compartment door lock sub-assembly to the console compartment door sub-assembly with the 2 screws.


Hide 58905 3.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (except Slide Console Type)

a.

Install the console compartment door sub-assembly to the rear console box sub-assembly with 2 new bushes.


b.
B337865

Push in the shaft until it contacts the bush.


c.

Try to move the shaft left and right and check that there is no rattle.


Hide 58905 4.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (for Slide Console Type)

a.

Install the console compartment door sub-assembly with the 4 screws.


Hide 58903A 5.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY

a.

Attach the 2 clips and 4 claws to install the console rear end panel sub-assembly.