Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM3090E _53 Suspension _008765 REAR SUSPENSION _0049359 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH

C129647
1.603,0.446 1.785,0.641 0.181,0.194 10 A 2.208,0.158 2.346,0.312 0.138,0.154 10 B

a.

Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.


b.

Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

CAUTION:

Be careful when drilling as shards of metal may fly about. Always use proper safety equipment.


NOTICE:

The gas is colorless, odorless and non poisonous.