Home › Engine / Hybrid System › 2AR-FE STARTING › STARTER(for 1.7 kW Type)
RM3090E _51 Engine / Hybrid System _008402 2AR-FE STARTING _0049375 STARTER(for 1.7 kW Type) A

2AR-FE STARTING  STARTER(for 1.7 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28226A 1.REMOVE MOTOR TERMINAL STARTER KIT

a.
A296167

Remove the nut and disconnect the lead wire from terminal C.


b.
A296168

Remove the 2 screws holding the motor terminal starter kit to the repair service starter kit.


c.

Remove the motor terminal starter kit.


d.

Remove the return spring and plunger from the repair service starter kit.


Hide 28120 2.REMOVE STARTER YOKE ASSEMBLY

a.
A296169

Remove the 2 through bolts and pull out the starter yoke assembly together with the starter commutator end frame assembly.


Hide 28130 3.REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY

a.
A251392

Remove the starter commutator end frame assembly from the starter yoke assembly.


Hide 28177 4.REMOVE STARTER ARMATURE PLATE

A284247

a.

Remove the starter armature plate from the starter yoke assembly.


Hide 28132A 5.REMOVE STARTER COMMUTATOR END FRAME COVER

a.
A296170

Using a screwdriver, remove the starter commutator end frame cover.


Hide 28160 6.REMOVE STARTER ARMATURE ASSEMBLY

A296171
0.958,0.521 1.198,0.521 1.198,0.521 1.531,0.688 false 0.771,0.448 1.083,0.604 0.313,0.156 10 *1
*1 Snap Ring Pliers


a.

Using snap ring pliers, remove the snap ring and washer.

NOTICE:

Do not drop the starter armature assembly.



b.

Remove the starter armature assembly from the starter commutator end frame assembly.


Hide 28255 7.REMOVE PLANETARY GEAR

a.
A296172

Remove the 3 planetary gears from the repair service starter kit.