Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0048746 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  TERMINALS OF ECU  


CHECK LANE DEPARTURE WARNING CAMERA


E256359
2.073,0.677 2.448,0.927 0.375,0.25 2.135,0.729 2.406,0.875 0.271,0.146 10 Q13

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
Q13-4 (LKSW) - Q13-11 (GND) B - W-B Lane departure alert main switch signal Ignition switch ON, lane departure alert main switch off 10 kΩ or higher
Ignition switch ON, lane departure alert main switch on Below 1 Ω
Q13-6 (CA1P) - Q13-11 (GND) B - W-B CAN communication signal Ignition switch ON Pulse generation
(Waveform 1)
Q13-7 (IGB) - Q13-11 (GND) GR - W-B Power source (IG) Ignition switch ON 11 to 14 V*1
Ignition switch ON 10.5 to 14 V*2
Ignition switch off Below 1 V
Q13-8 (BZ) - Body ground R - Body ground Skid control buzzer assembly output Ignition switch ON, buzzer not sounding 11 to 14 V
Ignition switch ON, buzzer sounding 0 to 1.5 V
Q13-11 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
Q13-12 (CA1N) - Q13-11 (GND) W - W-B CAN communication signal Ignition switch ON Pulse generation
(Waveform 1)

*1: w/o Stop and Start System

*2: w/ Stop and Start System


HINT:

Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.


a.
E270614
0.313,0.604 0.771,0.802 0.458,0.198 10 CH1 0.333,1.333 0.792,1.531 0.458,0.198 10 CH2 2.917,1.198 3.333,1.396 0.417,0.198 10 GND 2.917,1.583 3.292,1.813 0.375,0.229 10 GND

Waveform 1 (CAN communication signal)

Item Content
Tester Connection CH1: Q13-6 (CA1P) - Q13-11 (GND)
CH2: Q13-12 (CA1N) - Q13-11 (GND)
Tool Setting 1 V/DIV., 50 μs./DIV.
Condition Ignition switch ON

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).