Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0048746 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  FAIL-SAFE CHART  


CONDITIONS FOR MOMENTARY STOP


a.
Y128428

When control is stopped momentarily, "LDA NOT AVAILABLE" is displayed in the combination meter assembly, the lane departure alert indicator turns off and a "pong" sound is heard. This occurs under the following condition:

·

A high lane departure warning camera temperature is detected.


HINT:

If the system recovers and the conditions to stop lane departure alert control are not met, the lane departure alert system is reactivated.




STOP DUE TO SYSTEM MALFUNCTION


a.
Y128429

When a system malfunction is detected, the lane departure alert indicator turns off, "CHECK LDA SYSTEM" is displayed in the combination meter assembly and a "pong" sound is heard.

HINT:
·

After the vehicle is stopped and then the engine is restarted, the lane departure alert system operates again if the system is confirmed to be normal when the lane departure alert main switch is turned on while the vehicle is traveling within the system operating speed.

·

When CAN communication is malfunctioning, the sysyem returns to normal when CAN communication returns to normal.