Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMBUSTION TYPE POWER HEATER SYSTEM
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0049438 COMBUSTION TYPE POWER HEATER SYSTEM D

HEATING / AIR CONDITIONING  COMBUSTION TYPE POWER HEATER SYSTEM  DIAGNOSIS SYSTEM  


NOTICE:

The cause of failures (such as abnormal voltage, overheat, a short-circuit, breaking of functional components, etc.) can be checked by connecting the DTC tester and reading DTCs.


DIAGNOSTICS FUNCTION


a.

Turn the ignition switch off.


b.

Disconnect the A33 heater assembly connector.


c.

Connect connector A of the DTC tester to the vehicle wire harness, and connector B of the DTC tester to the heater assembly connector.


d.

Start the engine.


e.

Press the D DTC calling button to display 3-digit number DTCs.

E124452
3.781,4.708 3.01,5.146 false 4.448,4.771 4.615,5.198 false 4.823,4.771 4.615,5.198 false 5.5,4.76 6.042,5.146 false 5.885,4.771 6.042,5.146 false 4.938,3.823 5.208,2.813 false 5.135,3.823 5.281,3.26 false 5.313,3.823 5.458,3.26 false 5.479,3.823 5.625,3.26 false 5.635,3.823 5.781,3.26 false 5.802,3.823 5.969,3.104 false 5.271,3.26 5.927,3.26 false 5.885,4.135 6.396,4.135 false 0.917,1.083 0.604,0.406 0.604,0.406 0.781,0.406 false 2.365,1.896 2.667,1.396 false 0.708,2.875 0.917,2.469 false 0.823,0.344 3.26,0.656 2.438,0.313 10 Connector B (Heater assembly side) 3.823,0.333 5.094,0.552 1.271,0.219 12 DTC Display: 3.417,3.01 4.531,3.229 1.115,0.219 12 Control Panel: 0.135,2.906 1.469,3.083 1.333,0.177 10 DTC Check Harness 5.792,1.031 6.479,1.24 0.688,0.208 10 Normal 5.792,2.094 6.75,2.292 0.958,0.198 10 Malfunction 2.365,5.219 3.583,5.427 1.219,0.208 10 DTC Calling Button 3.844,5.219 5.229,5.417 1.385,0.198 10 Memory Clear Button 5.594,5.219 6.813,5.427 1.219,0.208 10 DTC Calling Button 5.25,2.656 6.281,2.844 1.031,0.188 10 Current Display 5.99,2.969 6.823,3.125 0.833,0.156 10 Past Record 6.479,3.969 7.115,4.313 0.635,0.344 10 "Heating" Symbol 1.906,1.938 3.219,2.417 1.313,0.479 10 Connector A (Vehicle wire harness side)



DESCRIPTION OF DISPLAY AND BUTTONS


·

AF: Current Malfunction (Blinks when there is a current malfunction)

·

DIAG: DTC (Example: 064 Flame sensor break)

·

Memory clear buttons: Clears DTCs (Press both buttons simultaneously for more than 2 seconds.)

·

> DTC calling button: Scrolls up DTCs (5 history codes can be stored.)

·

< DTC calling button: Scrolls down DTCs (5 history codes can be stored.)



FAULTY MEMORY


a.

The ECU is able to store up to 5 DTCs in memory. If it is full, new data is written over F5.



FAIL-SAFE


a.

If the glow plug breaks, the ECU detects the breakage and stops the automatic operation to prevent burner heater operation.