45510
1.FIX STEERING GEAR ASSEMBLY
| *a | Protective tape |
Using SST, fix the power steering gear assembly.
Apply protective tape to SST before use.
45047
2.REMOVE TIE ROD END SUB-ASSEMBLY LH
| *a | Matchmark |
Put matchmarks on the tie rod end sub-assembly LH and rack end.
Remove the tie rod end sub-assembly LH and lock nut.
45046
3.REMOVE TIE ROD END SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
45535B
4.REMOVE STEERING RACK BOOT CLIP
Using pliers, remove the 2 steering rack boot clips.
45536A
5.REMOVE NO. 2 STEERING RACK BOOT CLAMP
Using a screwdriver, remove the No. 2 steering rack boot clamp.
Be careful not to damage the steering rack boot.
45535D
6.REMOVE NO. 1 STEERING RACK BOOT CLAMP
Use the same procedure described for the No. 2 steering rack boot clamp.
45536
7.REMOVE NO. 2 STEERING RACK BOOT
Remove the No. 2 steering rack boot.
45535
8.REMOVE NO. 1 STEERING RACK BOOT
Remove the No. 1 steering rack boot.