Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH
RM3090E _54 Brake _008771 PARKING BRAKE _0049454 PARKING BRAKE SWITCH G

PARKING BRAKE  PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C217121
0.99,0.302 0.99,0.219 false
V100135

On
V100136

Off


Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Switch Condition Specified Condition
Switch connector terminal - Switch body On (Shaft is not pressed) Below 1 Ω
Off (Shaft is pressed) 10 kΩ or higher

If the result is not as specified, replace the parking brake switch assembly.